The standard consumption of CNC lathes has to match the following problems: little variances within the power source voltage at the position of the unit device, the ambient temperature is lower than 30 ℃, as well as the relative temp is less than 80undefinedPercent.lathe machining parts 

Device tool positioning environment demands

The position of the CNC lathe must be far out of the seismic provider. Stay away from the influence of direct sunlight and heat radiation, and avoid the effect of humidness and airflow. When there is a vibrations provider close to the CNC lathe, an anti-shake trench ought to be established across the device device. Or else, it can directly affect the reliability and stableness in the equipment tool, result in poor make contact with of electronic digital components, trigger problems, and change the reliability of the device resource.

Power requirement

Generally speaking, CNC lathes are positioned in the appliance instrument work shop, not merely the ecological temp alterations considerably, the use situations are bad, but also numerous electromechanical products, causing huge imbalances in the energy grid. Therefore, the installation placement of your CNC lathe must strictly control the power provide voltage. The change in the power supply voltage should be inside the allowed variety and continue to be relatively stable, normally it will modify the regular procedure from the CNC process.

Follow the instructions to work with the appliance

While using the CNC lathe, the consumer shall not affect the guidelines establish through the company within the manage program. The establishing of those guidelines is directly associated with the active qualities of your device device. Simply the space reimbursement guidelines might be tweaked in line with the real condition.

The consumer is just not allowed to affect the components of your CNC lathe at will, including utilizing a hydraulic chuck that exceeds the specs. Within the placing of accessories, the producer has fully regarded as the matching from the parameters of each website link. Sightless replacing will cause the factors in each connect to be mismatched, and also trigger accidents. The stress of hydraulic chuck, hydraulic tool rest, hydraulic tailstock, and hydraulic cylinder will probably be within the allowable pressure range and shall not be improved arbitrarily.




Maintenance of CNC lathe  

Causes of shaky machining reliability of CNC lathes  

What is actually a lathe? Exactly what does it do?  






    pikebangoo 發表在 痞客邦 留言(0) 人氣()